Pioneer VSX-C300 Operating Instructions - Page 31

English Sound Modes Automatic Listening mode (automatically selects 2 channel or multichannel outputs. This is the receiver's default mode) AUTO This mode automatically detects what kind of signal is being input and employs the proper listening mode of the receiver (switching between STEREO and STANDARD depending on the source). If you don't know what kind of signal (stereo, multichannel, etc.) you are using or don't want to bother with switching listening modes, use this feature. Selecting a Listening Mode Choose one that suits the soundtrack you are listening to or achieves the effect you want, as explained on the previous page. 1 RECEIVER DVD INPUT SELECT REMOTE MASTER TV/SAT VCR SETUP VOLUME TUNER FRONT DISPLAY MUTING RECEIVER TV TV CONTROL TV INPUT SELECT CHANNEL VOLUME SOURCE BAND CLASS EDIT DISPLAY S M L ROOM SETUP TOP MENU TUNE CH. SELECT ST AUDIO ENTER ST CH. LEVEL MENU TUNE TEST TONE SEARCH RF ATT MPX D.ACCESS DIMMER FLAT QUIET S.BASS 1 2 VIRTUAL 5-D 3 4 GAME TV SURR. 5 6 7 8 PHONES MUSICAL DRAMA ACTION SURR. 9 0 +10 ENTER STEREO STANDARD AUTO MIDNGHT 2ch MULTI 2/MULTI AUDIO/VIDEO PRE-PROGRAMMED REMOTE CONTROL UNIT 2 1 Press RECEIVER. This sets the remote control to the receiver control mode. 2 Press the button for the listening mode you want. The listening modes are written below the number buttons. Refer to page 30 for more details about each listening mode. MEMO: • The default setting is AUTO. • You can only select the PHONES SURR. mode when headphones are plugged into the headphone jack. • The listening mode you choose with headphones is fully independent of the listening mode with speakers. • If you disconnect the headphones while in PHONES SURR. mode the receiver will return to the listening mode it was in before you selected PHONES SURR. • If you're using a DTS 2 channel stereo source it doesn't matter what listening mode you select, the sound will only play in stereo. • When inputting a 96 kHz PCM signal you can only use AUTO or STEREO listening modes. If you select another mode the receiver will automatically switch to AUTO mode. • Each playback component can be set independently and retains its sound mode when another component is being used. 31 En Downloaded from www.Manualslib.com manuals search engine