Pioneer VSX-LX805 ELITE 11.4 Channel AV Receiver Instruction Manual English - Page 112
Selecting a source to play in ZONE 3, Adjusting the volume in ZONE 3
View all Pioneer VSX-LX805 ELITE 11.4 Channel AV Receiver manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Selecting a source to play in ZONE 3 1. While pressing the ZONE 3 HOLD button on the remote controller, press the input selector of the input you want to play in the separate room. On the main unit, repeatedly press the ZONE CONTROL button to display "Z3" on the display, then within 8 seconds use the input selector dial to select the input you want to play in the separate room. 2 Adjusting the volume in ZONE 3 Playback When ZONE 3 speakers are used 1. While pressing the ZONE 3 HOLD button on the remote controller, adjust with the volume buttons. To control on the main unit, press the ZONE CONTROL button on the main unit and then within 8 seconds adjust with the MASTER VOLUME dial. 1 2 11 When using an Integrated amplifier in the separate room 1. Use the volume dial on the integrated amplifier to adjust the volume. When using an integrated amplifier that does not have a volume control, adjust using the same procedure described in "When ZONE 3 speakers are used". • When connecting an integrated amplifier that does not have a volume control, in the System Setup menu, set "Multi Zone" - "Zone 3" - "Output Level" ( →p153) to "Variable". If you do not set this, the volume output will be very loud and there is a danger of damage to the integrated amplifier, speakers, etc. 112