Pioneer VSX-LX805 ELITE 11.4 Channel AV Receiver Instruction Manual English - Page 179
MCACC - Manual MCACC, and MCACC Data Check
View all Pioneer VSX-LX805 ELITE 11.4 Channel AV Receiver manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 179 highlights
7. The guidance about outputting the test tone is displayed. Refer to the illustration to set up the speaker setup microphone in the listening position. Follow the on-screen instructions to measure. Setup "Distance" ( →p139) of the Home screen, and you will no longer be able to change the values. (The setting units are displayed as "msec".) • Measurement may not be possible if the test tone is too loud or too soft. Tap "Level Adjust" to adjust the volume of the test tone. 8. When measurement is complete, "Calculating results" is displayed on the screen. Tap "Transfer to your product" to transfer the measurement data to the unit. Disconnect the speaker setup microphone. The speaker adjustments based on the measurement results are saved in the unit. You can modify 3 patterns of the filter curves from the measurement results and register them in 3 slots ( →p184). The filter curves that you register can be selected with "Room EQ" - "Dirac Live" ( →p93) in "AV Adjust". • When measurement is performed with Dirac Live, selection in "Advanced MCACC" - "Manual MCACC" ( →p160) and "MCACC Data Check" ( →p165) of the Home screen is no longer available. Furthermore, the measurement results are also reflected in "System Setup" - "Speaker" - 179