Pioneer VSX-LX805 ELITE 11.4 Channel AV Receiver Instruction Manual English - Page 72
Connecting an Integrated Amplifier (ZONE 2), Multi-zone, Playing Back ZONE 2
View all Pioneer VSX-LX805 ELITE 11.4 Channel AV Receiver manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Connecting an Integrated Amplifier (ZONE 2) Connections PRE OUT You can enjoy 2 ch audio in the separate room (ZONE 2) while performing playback in the main room (where this unit is located). Use an analog audio cable to connect the ZONE 2 PRE/LINE OUT jack on this unit to the input jack on an integrated amplifier in the separate room. • If the AV component is not equipped with an HDMI jack, use a digital coaxial cable, digital optical cable or analog audio cable. Also, the audio from externally connected AV components can be output to ZONE 2 only when the audio is analog or 2 ch PCM signal. When the AV component is connected to this unit with a digital coaxial cable or digital optical cable, change the audio output of the AV component to the PCM output. Setup • Settings are required to output audio to ZONE 2. Press on the remote controller to display the Home screen, then set "System Setup" - "Speaker" - "Configuration" - "Zone 2 Preout" ( →p136) to "Zone 2". • When connecting an integrated amplifier that does not have a volume control, in the System Setup, set "Multi Zone" - "Zone 2" - "Output Level" ( →p152) to "Variable (Default Value : Fixed)". If you do not set this, the volume output will be very loud and there is a danger of damage to the integrated amplifier, a Input speakers, etc. When connecting an integrated amplifier that has a volume Terminal control, leave this as "Fixed". Integrated amplifier a Analog audio cable Multi-zone ( →p108) Playing Back (ZONE 2) ( →p109) 72