Pioneer VSX-LX805 ELITE 11.4 Channel AV Receiver Instruction Manual English - Page 214
General Specifications, North American and Taiwanese models, European, Australian and Asian models
View all Pioneer VSX-LX805 ELITE 11.4 Channel AV Receiver manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 214 highlights
General Specifications Appendix Amplifier Section Rated Output Power Maximum Effective Output Power THD+N (Total Harmonic Distortion + Noise) Input Sensitivity and Impedance Rated RCA Output Level and Impedance Rated XLR Output Level and Impedance Phono Maximum Input Signal Voltage Frequency Response Tone Control Characteristics Signal to Noise Ratio Supported impedance of Speakers Headphone Rated Output North American and Taiwanese models European, Australian and Asian models (North American models) With 8 ohm loads, both channels driven, from 20Hz20kHz; rated 150 watts per channel minimum RMS power, with no more than 0.08% total harmonic distortion from 250 milliwatts to rated output. (FTC) (Taiwanese models) 11 ch × 220 W at 6 ohms, 1 kHz, 1 ch driven of 1% THD (IEC) 11 ch × 220 W at 6 ohms, 1 kHz, 1 ch driven of 1% THD (IEC) (North American models) 260 W at 6 ohms, 1kHz, 1 ch driven of 10%THD 11ch × 260 W at 6 ohms, 1 kHz, 1 ch driven of 10% THD (JEITA) 0.08% (20 Hz - 20,000 Hz, Rated output power) 200 mV/47 kΩ (LINE(RCA)), 3.5 mV/47 kΩ (PHONO MM), ±0.2 mV/44 kΩ (LINE(XLR)) PRE OUT : 1 V/470 Ω PRE OUT (ZONE 2) : 1 V/ 2.2 kΩ LINE OUT (ZONE 2, ZONE B): 200 mV/2.2 kΩ LINE OUT (ZONE 3) : 200 mV/470 Ω PRE OUT : 2 V/220 Ω 70 mV (MM 1 kHz 0.5%) 10 Hz - 100 kHz/+1 dB, -3 dB (Direct/Pure Direct) MAIN : ±10 dB, 20 Hz (BASS), ±10 dB, 20 kHz (TREBLE) ZONE 2 : ±10 dB, 100 Hz (BASS), ±10 dB, 10 kHz (TREBLE) ZONE 3 : ±10 dB, 100 Hz (BASS), ±10 dB, 10 kHz (TREBLE) 107 dB (IHF-A, LINE IN, SP OUT), 78 dB (IHF-A, PHONO IN, SP OUT) 4 Ω - 16 Ω 75 mW + 75 mW (32 Ω, 1 kHz, 10% THD) 214