Pioneer VSX-LX805 ELITE 11.4 Channel AV Receiver Instruction Manual English - Page 182
Dirac Live, Measuring with Dirac Live, Dirac Live Bass Control
View all Pioneer VSX-LX805 ELITE 11.4 Channel AV Receiver manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 182 highlights
Dirac Live Dirac Live® is an advanced room correction technology developed by Dirac Research. As one of the most advanced room correction technology available on the market, Dirac Live helps listeners to correct for one of the weakest components in the audio chain: the listening room. Dirac Live not only corrects the frequency response, but also the impulse response of the loudspeakers in a room, yielding improved imaging and timbre, better clarity, tighter bass, and less early reflections, as well as reduced resonances and room modes. Additional Functions Dirac Live Bass Control Dirac Live Bass Control is a technology to manage low-frequency channel routing from the signal to the playback channels (speakers) of your audio device. Additionally, with full control over the device's channel and frequency routing and output, the Dirac Live room correction technology is significantly augmented. In particular systems with multiple subwoofers will see a substantially improved room correction and bass performance. To use Dirac Live Bass Control, you need to register with Dirac Live and obtain a Dirac Live Bass Control license. For details, refer to the Dirac Live website. https://www.dirac.com/online-store/ Setup Measuring with Dirac Live Use the Pioneer Remote App to use Dirac Live to take measurements. Use the most recent version. Note that you cannot make settings using operations on this unit. Refer to "Pioneer Remote App" ( →p181) for information about the app. Also have a tripod ready to set up the speaker setup microphone. • Calibration takes about 20 minutes to be completed. 1. Start the Pioneer Remote App and tap the unit when displayed. 2. Connect the supplied Speaker Setup microphone to the SETUP MIC jack on the main unit. SETUP MIC 3. Tap "Yes", confirm that the displayed speaker configuration is correct, then tap "Yes". • If the setting in "System Setup" - "Speaker" - "Configuration" - "Speaker Channels" ( →p134) is different to the number of connected speaker channels, an error is displayed and measurement cannot be performed. 4. Select whether to use Dirac Live Bass Control. Select "Use" to use it and log into Dirac Live. 5. Select the method of measurement. There are two methods of measuring to choose from; "Quick Measurement" which measures 3 locations; at the listening position and to the left and right of the listening position; and "Full Measurement" which measures 9 positions including the listening position. Tap the method you prefer. "Quick Measurement": Set up the microphone at ear height in the listening position for measurement. Next measure by setting up the microphone 182