Pioneer VSX-LX805 ELITE 11.4 Channel AV Receiver Instruction Manual English - Page 197
ZONE B function, Multi-zone function, Remote Controller, Display, Cannot output audio to ZONE B
View all Pioneer VSX-LX805 ELITE 11.4 Channel AV Receiver manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 197 highlights
Troubleshooting ZONE B function Cannot output audio to ZONE B • To output audio to ZONE B, set the audio output destination for "Audio" - "Zone B" on "AV Adjust" to "On (A+B)" or "On (B)" and also set "Speaker" - "Configuration" - "Zone 2 Preout" on the System Setup menu to "Zone B". ( →p123) Multi-zone function Cannot ZONE-output the audio of externally connected AV components • If the AV component is not equipped with an HDMI jack, use a digital coaxial cable, digital optical cable or analog audio cable. Also, the audio from externally connected AV components can be output to ZONE 2 only when the audio is analog or 2 ch PCM signal. When the AV component is connected to this unit with an HDMI cable, digital coaxial cable or digital optical cable, change the audio output of the AV component to the PCM output. • When video and audio via HDMI input are output to ZONE 2, set "Input/Output Assign" - "TV Out / OSD" - "Zone 2 HDMI" ( →p129) to "Use" on the System Setup menu. • To output audio from an externally connected AV component to ZONE 3, use an analog audio cable for connection. Also, audio from externally connected AV components can be output to ZONE 3 only when it is an analog audio signal. Others • If the audio signal is from the NET or USB input selector, zone output is not possible for DSD audio signals. Remote Controller • Make sure that the batteries are inserted with the correct polarity. • Insert new batteries. Do not mix different types of batteries, or old and new batteries. • Make sure that the sensor of the main unit is not subjected to direct sunlight or inverter-type fluorescent lights. Relocate it if necessary. • If the main unit is installed in a rack or cabinet with colored-glass doors, or if the doors are closed, the remote controller may not work normally. Display The display does not light up • When the Dimmer function is working, the display may go dim or turn off. Press the DIMMER button, and change the brightness level of the display. ( →p18) 197