Pioneer VSX-LX805 ELITE 11.4 Channel AV Receiver Instruction Manual English - Page 143
LFE Mute Level, Volume, LFE Mute Level Default Value: 0 dB, Volume Display Default Value: Absolute
View all Pioneer VSX-LX805 ELITE 11.4 Channel AV Receiver manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 143 highlights
Audio Adjust LFE Mute Level Set the low-frequency effect (LFE) level for Dolby Digital series, DTS series, Multichannel PCM, and DSD signals. LFE Mute Level (Default Value: 0 dB) Select the low-frequency effect (LFE) level of each signal from "0 dB" to "-∞ dB". If the low-frequency effect sound is too strong, select "-20 dB" or "-∞ dB". Setup Volume Change the Volume settings. Volume Display (Default Value: Absolute) Switch the volume display between the absolute value and relative value. The absolute value 82.0 is equivalent to the relative value 0.0 dB. Absolute Relative Absolute value such as "0.5" and "99.5" • If the absolute value is set to 82.0, "82.0 Ref" will appear on the display. Relative value such as "-81.0 dB" and "+18.0 dB" Mute Level (Default Value: -∞ dB) Set the volume lowered from the listening volume when muting is on. Select a value from "-∞ dB", "-40 dB" and "-20 dB". Volume Limit (Default Value: Off) Set the maximum value to prevent the volume from becoming too loud. Select a value from "Off", "-32 dB" to "+17 dB". Power On Level (Default Value: Last) Set the volume level of when the power is turned on. Select a value from "Last" (Volume level before entering standby mode), "-∞ dB", and "-81.5 dB" to "+18.0 dB". • You cannot set a higher value than that of "Volume Limit". Headphone Level (Default Value: 0.0 dB) Adjust the output level of headphones. Select a value between "-12.0 dB" and "+12.0 dB". 143