Pioneer VSX-LX805 ELITE 11.4 Channel AV Receiver Instruction Manual English - Page 164
Advanced EQ Setup, Time Position Default Value: 30 - 50 msec, EQ Type Default Value: Symmetry
View all Pioneer VSX-LX805 ELITE 11.4 Channel AV Receiver manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
Manual MCACC Advanced EQ Setup Reverberation characteristics are automatically calibrated according to the settings made. After making the following settings, place the speaker setup microphone in the listening position, and connect to the SETUP MIC jack on the main unit. Press ENTER and follow the on screen instructions. Time Position (Default Value: 30 - 50 msec) Specify the calibrated time position in the range between "0 - 20 msec" and "60 - 80 msec" (10 msec intervals). If the reverberation characteristics differ for each frequency or each channel in the Reverb View graph, we recommend selecting "30 - 50 msec". If the overall reverberation characteristics are similar, we recommend selecting "60 - 80 msec". Setup EQ Type (Default Value: Symmetry) Select the calibration type. Symmetry Speakers that make one set as a left and right pair have their frequency characteristics calibrated flatly. Speakers not in pairs, such as the center speaker, are adjusted individually. Select when you want to give weight to phase characteristics for calibration. AllChannelAdjust Flatly calibrates individually the frequency characteristics of all speakers. Select when you want to give weight to frequency characteristics for calibration. Front Align Calibrates speakers other than the front speakers so their characteristics match those of the front speakers (front speakers are not calibrated). Select when you want to give weight to characteristics of the front speakers for calibration. Standing Wave Multi Position (Default Value: No) When you select "2" to "9", standing wave calibration can be performed at multiple listening positions along with the main listening position. If there is only one listening position, select "No". • If you select "2" to "9", calibration is first performed for the locations other than the main position, then the main position is calibrated last. 164