Pioneer VSX-LX805 ELITE 11.4 Channel AV Receiver Instruction Manual English - Page 136

Speaker ‰ Zone Speaker (Default Value: No) Set whether ZONE 2 speakers and ZONE 3 speakers are being used. • This setting cannot be selected when "Zone 2 Preout" is set to "Zone B". No When neither ZONE 2 speakers nor ZONE 3 speakers are used Zone 2 When ZONE 2 speakers are used Zone 2/Zone 3 When both ZONE 2 speakers and ZONE 3 speakers are used ‰ Zone 2 Preout (Default Value: Zone 2) Set an output destination of the audio output from ZONE 2 PRE/LINE OUT / ZONE B LINE OUT jack. • This setting is fixed to "Zone 2" when "Zone Speaker" is set to "Zone 2" or "Zone 2/Zone 3". Zone 2 Zone B When connecting an integrated amplifier in a separate room (ZONE 2) When connecting an integrated amplifier, transmitter of wireless headphones, etc. to ZONE B Setup ‰ Bi-Amp (Default Value: No) Set whether the speakers are bi-amp connected. • You cannot select a setting other than "No" or "Front" when using ZONE speakers. No Front Front/Center When no speakers are bi-amp connected When only front speakers are bi-amp connected • This setting cannot be selected under the following conditions. - "Speaker Channels" is set to "6.1.4 ch" or "7.1.4 ch" - "Speaker Channels" is set to "6.1.2 ch", "7.1.2 ch", "4.1.4 ch", or "5.1.4 ch" and "Zone Speaker" is set to "Zone 2" or "Zone 2/Zone 3" - "Speaker Channels" is set to "6.1 ch", "7.1 ch", or "2.1.2 ch" to "5.1.2 ch" and "Zone Speaker" is set to "Zone 2/Zone 3" When front speakers and the center speaker are bi-amp connected This can only be selected when you have set "Speaker Channels" to "3.1 ch", "5.1 ch", or "7.1 ch". ‰ Speaker Impedance (Default Value: 6 ohms or above) Set the impedance (Ω) of the connected speakers. • For impedance, check the indications on the back of the speakers or their instruction manual. 4ohms When any of the connected speakers have 4 Ω or more to less than 6 Ω impedance 6ohmsorabove When the connected speakers all have 6 Ω or more impedance 136