Pioneer VSX-LX805 ELITE 11.4 Channel AV Receiver Instruction Manual English - Page 40
Speakers you can use with this unit and cable connections, Speakers you can use with this unit
View all Pioneer VSX-LX805 ELITE 11.4 Channel AV Receiver manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Speakers you can use with this unit and cable connections Speaker Connections Speakers you can use with this unit This unit supports speakers with 4 Ω to 16 Ω impedance. For speaker impedance, check the speaker instruction manual. (Note) Speaker Impedance If any of the speakers to be connected has an impedance of 4 Ω or more and less than 6 Ω, set "Speaker Impedance" to "4ohms" for "Speaker Setup" in the Initial Setup section ( →p175). When setting "Speaker Impedance" from the System Setup menu, press the button on the remote controller to display the Home screen, and select "System Setup" - "Speaker" - "Configuration", then set "Speaker Impedance" ( →p136) to "4ohms". Connect the Speaker Cables 1/2˝ (12 mm) Make correct connection between the unit's jacks and speaker's jacks (+ side to + side, and - side to - side) for each channel. If the connection is wrong, a bass sound will not be reproduced properly due to reverse phase. Twist the wires exposed from the tip of the speaker cable so that the wires do not stick out of the speaker terminal when connecting. If the exposed wires touch the rear panel, or the + side and - side wires touch each other, a malfunction may occur. 5.1ch 7.1ch 5.1.2ch 7.1.2ch 5.1.4ch 7.1.4ch 40