Pioneer XW-NAC3-K Operating Instructions - Page 15
Shuffle, Hi-lite Scan
View all Pioneer XW-NAC3-K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
iPod/iPhone playback 03 English Français Español SHUFFLE2 Two iPod/iPhone units can be played alternately with no break in sound (SHUFFLE2). A bit before the currently playing iPod/iPhone track ends, playback begins on the other iPod/ iPhone track and the volume is gradually raised to fade in seamlessly (Cross fade). During the SHUFFLE2 operation, the order of track playback is set by the shuffle function. 1 Connect two iPod/iPhone units to the iPod/iPhone connector ports (iPod a, iPod b), then press iPod a or iPod b. 2 Press MENU to access the iPod/iPhone menu. 3 Select the track area that you want to play back, then press ENTER. 4 Press . The SHUFFLE2 mode is set, and the SHUFFLE2 indicator lights; the unit connected to the iPod a connector port will playback. A bit before the currently playing iPod/iPhone track ends, the other iPod/iPhone unit begins cross fade playback. The same operation is repeated thereafter until all tracks on both units have been played.1 • To cancel the SHUFFLE2 mode, press either once again, or . • The SHUFFLE2 mode will also be canceled if the function is switched to any another input (including iPod a or iPod b). HI-LITE Scan Each track is played back for a few seconds at a certain time from the track beginning, thus allowing desired tracks to be found quickly. 1 Connect an iPod/iPhone to the iPod/ iPhone connector ports, then press iPod a or iPod b. 2 Press MENU to access the iPod/iPhone menu. 3 Select the track area that you want to play back, then press ENTER. 4 Press HI-LITE. HI-LITE scan function will begin from the first track on the selected iPod/iPhone. If playback was already underway, the HI-LITE scan will begin from the currently playing track. After a track is played for a few seconds, the next track will be found and a certain time2 from the track beginning will be played for a few seconds. When two iPod/iPhone units are connected simultaneously, the first track on the alternate iPod/iPhone will be found and a certain time from the track beginning will be played for a few seconds. Thereafter, the same process will be repeated until all tracks have been found and played for a few seconds each. • To cancel the HI-LITE Scan operation, press HI-LITE once more. • The HI-LITE Scan mode will also be canceled if the function is switched to any another input (including iPod a or iPod b). Note 1 During Cross Fade operation, /, and / are deactivated. 2 If a track's total length is too short, the track will be played back from the track beginning for a few seconds. 15 En