Pioneer XW-NAC3-K Operating Instructions - Page 40
Problem, Remedy
View all Pioneer XW-NAC3-K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
09 Additional information Problem Cannot access the network. The audio files stored on components on the network, such as a PC, cannot be played back. Cannot access the component connected to the network. Remedy • The LAN cable is not firmly connected. Firmly connect the LAN cable (see page 24). • The router is not switched on. Switch on the router. • The corresponding IP address is not properly set. Switch on the built-in DHCP server function of your router, or set up the network manually according to your network environment (see page 28). • The IP address is being automatically configured. The automatic configuration process takes time. Please wait. • Internet security software is currently installed in the connected component. There are cases where a component with Internet security software installed cannot be accessed. • Install Windows Media Player 11 or 12 on your PC (see page 31). • Play back audio files recorded in MP3, WAV (LPCM only), MPEG-4 AAC, FLAC, or WMA. Note that some audio files recorded in these formats may not be played back on this unit. • Audio files recorded in MPEG-4 AAC or FLAC are being played back on Windows Media Player 11 or 12. Try using another server. Refer to the operation manual supplied with your server. • The component connected to the network is not properly operated. Check whether the component is affected by special circumstances or is in the sleep mode. Try rebooting the component if necessary. • The component connected to the network does not permit file sharing. Try changing the settings for the component connected to the network. • The folder stored on the component connected to the network has been deleted or damaged. Check the folder stored on the component connected to the network. • The component connected to the network is not properly set. If the client is automatically authorized, you need to enter the corresponding information again. Check whether the connection status is set to "Do not authorize". • There are no playable audio files on the component connected to the network. Check the audio files stored on the component connected to the network. • The audio component on the network which has been switched off is switched on. Switch on the audio component on the network before switching on this unit. 40 En