ProForm 1000 Lt Treadmill English Manual - Page 11

7. Remove the band securing the Upright Wire (73) to the right Upright (85). Have a second person hold the console assembly near the right Upright. Connect the Upright Wire (73) to the wire harness on the console assembly. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Then, insert the connectors into the right Upright (85). 7 Console Assembly 73 85 Wire Harness 73 Wire Harness 8. Remove the band securing the TV Cable (112) to the left Upright (85). Connect the TV Cable to the cable extending from the console assembly. Then, insert the cables into the left Upright. Next, insert the brackets on the Handrails (70) into the Uprights (85). Make sure that no wires are pinched. 8 Cable Console Assembly Bracket 70 112 85 9. Attach the console assembly to the Uprights (85) with four 3/8" x 1 1/4" Bolts (72) and four 9 3/8" Star Washers (67) (only one side is shown). Start all four Bolts, and then tighten each of them. 85 72 Console 67 Assembly 11