ProForm 1000 Lt Treadmill English Manual - Page 14

Before operating the television, you must connect an antenna or a 75 ohm CATV cable to the 75 ohm terminal or an RCA component video cable to the audio/video input jacks. Note: Use a CATV cable to connect to an external source such as a cable box, satellite TV box, VCR, or analog cable. No RCA component video cable, CATV cable, antenna, or adapter is included. HOW TO CONNECT AN ANTENNA Place an indoor antenna or an outdoor combination VHF/UHF antenna in the desired location. Outdoor antennas are subject to weathering that can reduce signal quality. Inspect your outdoor antenna and the lead-in wiring before connecting the antenna. Indoor Antenna Outdoor Combination VHF/UHF Antenna Note: Due to an FCC requirement, analog signals will no longer be broadcast over the air after June 12, 2009. If you wish to view television signals through an antenna after that date, you must have an antenna capable of receiving digital signals or a digital converter box. Cable television will not be affected. HOW TO CONNECT AN EXTERNAL SOURCE USING A CATV CABLE 1. Connect one end of a 75 ohm CATV cable to the 75 ohm output jack on your external source. 2. Plug in the power cord of your external source. See your external source user's manual for proper grounding instructions. 75 Ohm CATV Cable 1. Connect the 75 ohm CATV cable from the antenna to the 75 ohm terminal on the treadmill frame near the power cord. 75 Ohm CATV Cable 75 Ohm Terminal 3. Connect the 75 ohm CATV cable to the 75 ohm terminal on the treadmill frame near the power cord. See the drawing at the left. HOW TO CONNECT A VCR OR DVD PLAYER USING AN RCA COMPONENT VIDEO CABLE 1. Connect the three-pronged end of an RCA component video cable to your VCR or DVD player. 300 Ohm Flat Wire 1. Connect the 300 ohm flat wire from the antenna to a 300 ohm to 75 ohm adapter. Screwdriver 300 Ohm Flat Wire 2. Plug in the power cord of your VCR or DVD player. See your VCR or DVD player user's manual for proper grounding instructions. 3. Connect the RCA component video cable to the audio/video input jack on the back of the console. 300 to 75 Ohm Adapter 2. Connect the 300 ohm to 75 ohm adapter to the 75 ohm terminal on the treadmill frame near the power cord. 300 to 75 Ohm Adapter 75 Ohm Terminal 14