ProForm 1000 Lt Treadmill English Manual - Page 13

If you purchase the optional chest pulse sensor (see page 28), follow the steps below to install the receiver included with the chest pulse sensor. 1. Make sure that the power cord is unplugged. Remove the indicated #8 x 3/4" Screws (7) from 1 the back of the Console Base (98). 105 98 7 7 7 7 7 7 7 2. While a second person holds the Console (105) away from the Console Base (98), connect the wire on the receiver to the indicated wire extending from the Console. Next, hold the receiver so that the antenna is oriented as shown and is facing away from the Console. Attach the receiver to the Console in the location shown with the two included small screws. 3. Make sure that no wires are pinched. See drawing 1. Reattach the Console (105) to the Console Base (98) with the #8 x 3/4" Screws (7). Discard the other wires included with the receiver. 2 Wires Receiver 98 105 Antenna Small Screws 13