ProForm C840 Bench English Manual - Page 16
Locate the Lat Cable 81.
View all ProForm C840 Bench manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
35. Locate the Lat Cable (81). Route the Cable up through the Rear Top Frame (39) and over a 90mm Pulley (90). Attach the Pulley inside the Rear Top Frame with an M10 x 78mm Bolt (110), two M10 Washers (99), two 17mm Spacers (86), and an M10 Nylon Locknut (97). 36. Route the Lat Cable (81) over a 90mm Pulley (90) and down through the Rear Top Frame (39). Attach the Pulley inside the Rear Top Frame with an M10 x 78mm Bolt (110), two M10 Washers (99), two 17mm Spacers (86), and an M10 Nylon Locknut (97). 35 90 81 39 97 99 86 86 99 110 36 97 90 86 81 99 39 86 99 110 37. Wrap the Lat Cable (81) under a 90mm Pulley 37 (90). Attach the Pulley and a Small Cable Trap (125) to the indicated hole in the two Pulley Plates (72) with an M10 x 45mm Bolt (112) and an M10 Nylon Locknut (97). Make sure the Cable Trap is turned to hold the Cable in the groove of the Pulley. 38. Wrap the Lat Cable (81) over a 90mm Pulley 38 (90). Attach the Pulley inside the Rear Top Frame (39) with an M10 x 78mm Bolt (110) and an M10 Nylon Locknut (97). 81 97 125 72 112 90 72 39 90 97 110 81 39. Attach the Lat Cable (81) to the M10 x 19mm Hex 39 Head Bolt (132) in the Weight Carriage (71) with an M10 Nylon Locknut (97). Do not overtighten the Locknut; the Cable must be able to pivot. 16 81 71 97 132