Reebok 1000 X Elliptical English Manual - Page 5

ASSEMBLY To hire an authorized service technician to assemble the elliptical exerciser, call 1-800-445-2480. Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included hex keys, assembly requires a Phillips screwdriver , an adjustable wrench , and a rubber mallet . As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the parentheses is the quantity needed for assembly. Note: Some small parts may have been preassembled. If a part is not in the hardware kit, check to see if it has been preassembled. #8 x 1/2" Screw (92)-6 M4 x 16mm Screw (90)-4 #8 x 1 3/4" Screw (95)-1 #8 x 2" Screw (74)-4 M6 x 14mm Flat Head Screw (75)-1 M6 x 18mm Patch Screw (108)-6 M8 x 19mm Patch Screw (85)-4 M10 x 15mm Patch Screw (77)-2 M10 x 22mm x 1.5mm Washer (100)-2 M8 Hex Nylon Locknut (80)-4 M10 Hex Nylon Locknut (103)-4 Barrel Nut (76)-1 M8 x 55mm Patch Screw (89)-4 M10 x 58mm Bolt (84)-4 M10 x 120mm Patch Screw (78)-2 5