Ricoh 3035 Fax Reference - Page 178

Reception The originator can request transfer of e-mail sent to another fax machine by specifying the e-mail address as follows: ❖ Fax Number fax=destination fax number@host name of this machine.domain name Example: to transfer to fax number 212-123-4567: [email protected] ❖ Single destination programmed in the destination list fax=qregistration number of 5 digits or less@host name of this machine.do- main name 3 Example: to transfer to the destination number 00001: [email protected] ❖ Group destination programmed in the destination list fax=qppregistration number of 5 digits or less@host name of this machine.domain name Example: to transfer to the destination programmed under Group number 00004: [email protected] Note ❒ If an e-mail transfer request is received when the "SMTP RX File Delivery Set- tings" is "Off" in the Facsimile Features menu, this machine responds with an error message to the SMTP server. ❒ You can make settings that limit transfer to specified originators. ❒ Using this function, you can also send documents from your e-mail application to e-mail addresses and G3 fax machines' destinations through this machine simultaneously. ❒ For the maximum number of destinations you can program in a group, see "Maximum Values". Reference p.285 "Maximum Values" "Facsimile Features", General Settings Guide JBIG Reception If you use JBIG (Joint Bi-level Image Experts Group) compression, you can send photographic originals faster than with other methods of compression. It allows you to receive documents sent in the JBIG format through JBIG Transmission. Important ❒ This function is not available with Internet Fax function. ❒ If ECM is turned off in the Facsimile Features menu, JBIG Reception is unavailable. Reference "Facsimile Features", General Settings Guide 168