Ricoh 3035 Fax Reference - Page 79
Chain Dial, Select, Cancel, Prev., Clear/Stop, Pause/Redial, Start
View all Ricoh 3035 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Specifying a Destination Note ❒ Destinations programmed in groups can be checked using "Print Group Dial List" in "System Settings". ❒ If a destination where a fax number, e-mail address, or IP-Fax destination is not programmed is included in the specified group, the confirmation 1 message appears. Press [Select] to specify destinations where the fax number, the e-mail address, or IP-Fax destination is programmed. Press [Cancel] to change the destination. You can select the priority order used to specify an alternative destination if there is no destination of the specified type. Make this setting with User Parameters (switch 32, bit 0) in the Fac- simile Features menu. ❒ To cancel any destination(s) among the group, press [UPrev.] and [TNext] to display the desired destination. Then, press the {Clear/Stop} key. You can also cancel a transmission by pressing the highlighted Destination key to deselect it. Reference p.285 "Maximum Values" "System Settings", General Settings Guide "Facsimile Features", General Settings Guide "Registering Addresses and Users for Facsimile/Scanner Functions", General Settings Guide Chain Dial This allows you to compose a telephone number from various parts, some of which may be stored in Destination keys and some of which may be entered using the number keys. For example, to dial "01133-1-555333" using a Destination key that is programmed as "01133", use the following procedure: Important ❒ You cannot use this function with Internet Fax transmission. A Place the original, and then select the scan settings you require. B Press the Destination key that is programmed "01133". C Press the {Pause/Redial} key. D Enter {1}, {5}, {5}, {5}, {3}, {3}, {3} using the number keys. E Press the {Start} key. 69