Ricoh 3045 Operating Instructions - Page 90
If You Cannot Make Copies As You Want
View all Ricoh 3045 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Troubleshooting If You Cannot Make Copies As You Want This section explains causes and remedies when copy results are not as expected. ❖ Basic Problem Causes Solutions Copies are not stapled. There are jammed staples Remove jammed staples. See Gener- in the stapler. al Settings Guide. 3 Note ❒ After removing jammed staples, staples might not be ejected the first few times you try to use the stapler. The number of copies exceeds the capacity of the stapler. Check the stapler capacity. See p.110 "Staple". Copy paper is curled. Turn the copy paper over in the tray. Staples are wrongly posi- Originals are not set cor- tioned. rectly. Check the correct position to place the originals. See p.37 "Staple". You cannot combine sever- Selected functions cannot Check the combination of functions al functions. be used together. and make the settings again. Reference p.105 "Combination Chart" When sorting, the pages are divided into two blocks. The memory became full in the middle of sorting and the pages were delivered in two blocks. You can interrupt copying when the memory becomes full. See p.103 "Memory Full Auto Scan Restart". Paper does not output during printing with stapling. When you stop printing while using the staple function, papers not stapled during printing may be left in the staple unit. Press the {Reset} key and cancel copy settings, including stapling. 80