Ricoh Aficio SP 5210DN Operating Instructions - Page 110
Label Paper, Special Paper, The [Menu] key > [Paper Input] > [Paper Type: tray name] > [Label
View all Ricoh Aficio SP 5210DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
6. Loading Paper Label Paper Paper type setting using the control panel Paper type setting using the printer driver Supported input tray 6 Maintenance Duplex printing The [Menu] key > [Paper Input] > [Paper Type: (tray name)] > [Label Paper] > the [OK] key [Labels] Any input tray can be used. Default: [Label Paper 1] • [Label Paper 1] • [Label Paper 2] • [Label Paper 3] • [Label Paper 4] If prints made using the paper tray show heavy smudging, use the following procedure to change the paper type setting from the control panel: • Press the [Menu] key, select [Maintenance], [General Settings], [Label Paper Setting], and then select [Label Paper 1], [Label Paper 2], [Label Paper 3], or [Label Paper 4]. When specifying paper thickness, remember that a higher number indicates greater thickness. Also, because the paper thickness will normally be detected automatically, change this setting only if a print problem occurs. Not supported Special Paper Paper weight Paper type setting using the control panel 52 to 220 g/m2 (14 to 59 lb.) • The [Menu] key > [Paper Input] > [Paper Type: (tray name)] > [Special Paper 1] or [Special Paper 2] or [Special Paper 3] > the [OK] key • [Special Paper 1]: 52 to 105 g/m2 (14 to 28 lb.) • [Special Paper 2]: 106 to 163 g/m2 (28 to 43 lb.) • [Special Paper 3]: 164 to 220 g/m2 (44 to 59 lb.) 108