Ricoh Aficio SP 5210DN Operating Instructions - Page 63
Installing the Wireless LAN Interface Board, Connection or p.72 USB Cable Connection.
View all Ricoh Aficio SP 5210DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Installing the Interface Units CEC059 3 Connect the cable to the Gigabit Ethernet board. For details see p.69 "Ethernet Cable Connection" or p.72 "USB Cable Connection". • Confirm that the Gigabit Ethernet board was correctly installed by printing the configuration page. If it is correctly installed, "Gigabit Ethernet" will appear for "Device Connection" on the configuration page. • If the board was not installed properly, repeat the procedure from step 4. If it cannot be installed correctly even after reattempting installation, contact your sales or service representative. • For details about printing the configuration page, see p.44 "Test Printing". • Before using the Gigabit Ethernet board, you must configure settings from the printer control panel. For details, see p.75 "Ethernet Configuration". Installing the Wireless LAN Interface Board • Before beginning work, ground yourself by touching something metal to discharge any static electricity. Static electricity can damage the unit. • Do not subject the unit to physical shocks. 61