Home » Ricoh Manuals » Laser Printers » Ricoh Aficio SP 5210DN » Manual Viewer

Ricoh Aficio SP 5210DN Operating Instructions - Page 50

Attaching the Paper Feed Unit

View all Ricoh Aficio SP 5210DN manuals

Add to My Manuals
Save this manual to your list of manuals

Page 50 highlights

3. Installing Options Attaching the Paper Feed Unit • If the machine topples, or if a cover or other part gets broken, you must turn the power switch to off and disconnect the power cord plug from the wall outlet. Then contact your service representative and report the problem. Do not use the machine. Doing so could result in fire or electric shock. 3 • The printer weights approximately 23 kg (51 lb.). When moving the printer, use the inset grips on both sides, and lift slowly. The printer will break or cause injury if dropped. • Unplug the power cord from the wall outlet before you move the machine. While moving the machine, take care that the power cord is not damaged under the machine. Failing to take these precautions could result in fire or electric shock. • Do not place the machine on an unstable or tilted surface. If it topples over, an injury might occur. • Lifting the paper feed unit carelessly or dropping it may cause injury. • The printer might topple over and cause damage and injuries if four optional paper feed units are stacked to a printer which is installed directly on the floor. For details about preventing the machine toppling over, contact your service representative. • The printer should always be lifted by two people. • Do not grip on the tray area when lifting the printer. • When four paper feed units are installed, they are detected as "Tray 2", "Tray 3", "Tray 4", and "Tray 5", starting from the upper unit. • The same procedure applies when attaching the optional paper feed unit with casters. • The number of optional trays that can be attached differs depending on the location where the printer is installed. 48

Section	Page
Operating Instructions <Hardware Guide>	1
TABLE OF CONTENTS	3
How to Read This Manual	8
Symbols	8
Model-Specific Information	9
Machine Types	9
Positions of WARNING and CAUTION Labels	11
Power Switch Symbols	12
Manuals for This Printer	13
List of Options	15
Operating Instructions	16
Reading the HTML Manuals on the CD-ROMs	16
Reading the HTML Manuals That You Install on the Computer	16
1. Guide to the Printer	19
Exterior: Front View	19
Exterior: Rear View	21
Interior	23
Control Panel	25
Display Panel	27
Entering Characters	28
How to Enter Characters	29
2. Setting Up the Printer	33
Printer Setup Procedure	33
Place to Install	34
Unpacking	38
Turning the Printer's Power On and Off	41
Turning on the Power	41
Turning off the Power	43
Selecting the Display Language	45
Test Printing	46
3. Installing Options	47
Available Options	47
Order of Option Installation	47
Where to Install Options	47
Caution When Re-installing the Controller Board	49
Attaching the Paper Feed Unit	50
Installing the Memory Expansion Units	54
Installing the Hard Disk	54
Installing the SDRAM Module	57
Installing the Interface Units	61
Installing the Gigabit Ethernet Board	61
Installing the Wireless LAN Interface Board	63
Installing the IEEE 1284 Interface Board	65
Installing the SD Memory Card Options	68
4. Connecting the Printer	71
Ethernet Cable Connection	71
Reading the LED Lamps	73
USB Cable Connection	74
Parallel Cable Connection	76
5. Configuration	77
Ethernet Configuration	77
Specifying an IP Address (No DHCP)	78
Receiving an IP Address Automatically (DHCP)	80
Configuring Network Settings When Using NetWare	82
Setting the Ethernet Speed	83
Wireless LAN Configuration	86
Setting the SSID	88
Confirming Wireless Network Connectivity	89
Cautions When Using a Wireless LAN	89
Setting Security Method of Wireless LAN	91
Setting a WEP Key	91
Setting WPA	92
Configuring IEEE 802.1X	96
Installing a Site Certificate	96
Installing Device Certificate	96
Setting Items of IEEE 802.1X for Ethernet	97
Setting Items of IEEE 802.1X for Wireless LAN	99
6. Loading Paper	103
Supported Paper for Each Tray	103
Symbols	103
Standard Paper Feed Tray	103
Optional Paper Feed Tray	104
Bypass Tray	106
Supported Paper Types	107
Plain Paper	107
Middle Thick	108
Thick Paper	108
Thin Paper	108
Letterhead	109
Label Paper	110
Special Paper	110
Preprinted Paper	111
Color Paper	111
Recycled Paper	111
OHP transparencies	112
Envelopes	112
Storing Paper	115
Non-Recommended Paper Types	116
Print Area	117
Loading Paper in Trays	119
Loading Paper into a Standard or Optional Paper Feed Tray	119
Specifying paper size automatically for a standard or optional paper feed tray	123
Specifying standard size paper for a standard or optional paper feed tray	124
Specifying custom size paper for a standard or optional paper feed tray	125
Specifying a paper type for standard or optional paper feed tray	126
Loading Paper onto Bypass Tray	128
Specifying standard size paper for the bypass tray	129
Specifying custom size paper for the bypass tray	131
Specifying a paper type for the bypass tray	133
Loading Envelopes	135
Loading Envelopes onto Bypass Tray	135
Specifying envelope size for the bypass tray	138
Loading Envelopes into a Standard or Optional Paper Feed Tray	140
Specifying envelope size for a standard or optional paper feed tray	145
Printing on Fixed-Orientation Paper	147
Registering Unique Names to Paper Types	149
Registering Names to Paper Types	149
Setting User Paper Types to Trays	149
Printing Using Registered Paper Types	150
7. Maintaining the Printer	151
Replacing the Print Cartridge	151
Replacing the Maintenance Kit	156
Cautions When Cleaning	157
Cleaning the Friction Pad and the Paper Feed Roller	158
Cleaning the Registration Roller	161
8. Adjusting the Printer	165
Adjusting the Image Density	165
Adjusting Printing Position	167
Adjusting the Paper Type	170
9. Troubleshooting	173
Error and Status Messages Appear on the Control Panel	173
Status Messages (in alphabetical order)	173
Alert Messages (in alphabetical order)	174
Panel Tones	179
Printer Does Not Print	180
Checking the Port Connection	181
Windows	181
Mac OS X	182
Other Printing Problems	183
When You Cannot Print Properly	183
Paper Misfeeds Occur Frequently	185
The printed image is different from the image on the computer	187
When Printer is Not Functioning Properly	188
Additional Troubleshooting	190
10. Removing Misfed Paper	193
When Paper is Jammed	193
Paper Misfeed Message (A)	195
Paper Misfeed Message (B)(C)	199
Paper Misfeed Message (Y1)(Y2)(Y3)(Y4)	204
Paper Misfeed Message (Z1)(Z2)	207
11. Appendix	211
Moving and Transporting the Printer	211
Moving the Printer in a Short Distance	211
Consumables	213
Print Cartridge	213
Maintenance Kit	214
Specifications	215
Mainframe	215
Options	218
Paper Feed Unit TK1120	218
Paper Feed Unit TK1130	219
Hard Disk Drive Type 2670	219
Memory Unit Type G 256 MB	219
Memory Unit Type I 512 MB	220
Gigabit Ethernet Board Type A	220
IEEE 802.11a/g Interface Unit Type M (mainly Europe and Asia)	220
IEEE 802.11a/g Interface Unit Type L (mainly North America)	221
IEEE 1284 Interface Board Type A	221
Trademarks	222

Match case Limit results 1 per page

Attaching the Paper Feed Unit

•

If the machine topples, or if a cover or other part gets broken, you must turn the power switch to

off and disconnect the power cord plug from the wall outlet. Then contact your service

representative and report the problem. Do not use the machine. Doing so could result in fire or

electric shock.

•

The printer weights approximately 23 kg (51 lb.). When moving the printer, use the inset grips

on both sides, and lift slowly. The printer will break or cause injury if dropped.

•

Unplug the power cord from the wall outlet before you move the machine. While moving the

machine, take care that the power cord is not damaged under the machine. Failing to take these

precautions could result in fire or electric shock.

•

Do not place the machine on an unstable or tilted surface. If it topples over, an injury might occur.

•

Lifting the paper feed unit carelessly or dropping it may cause injury.

•

The printer might topple over and cause damage and injuries if four optional paper feed units are

stacked to a printer which is installed directly on the floor. For details about preventing the machine

toppling over, contact your service representative.

•

The printer should always be lifted by two people.

•

Do not grip on the tray area when lifting the printer.

•

When four paper feed units are installed, they are detected as "Tray 2", "Tray 3", "Tray 4", and "Tray

5", starting from the upper unit.

•

The same procedure applies when attaching the optional paper feed unit with casters.

•

The number of optional trays that can be attached differs depending on the location where the printer

is installed.

3. Installing Options