Ricoh Aficio SP 5210DN Operating Instructions - Page 60
Fasten the controller board to the printer with the two screws.
View all Ricoh Aficio SP 5210DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
3. Installing Options 8. Fasten the controller board to the printer with the two screws. 3 CEC072 • After finishing the installation, you can check the SDRAM module is properly installed: Print the configuration page from the [List/Test Print] menu. If it is installed properly, the memory capacity will appear under "Total Memory" on the configuration page. • The table below shows the total SDRAM module capacities. Standard 256 MB 256 MB Extended 256 MB 512 MB Total 512 MB 768 MB • If the SDRAM module is not properly installed, repeat this procedure. If you cannot install it properly even after reinstallation, contact your sales or service representative. • Install the controller board carefully to prevent any malfunction. • For details on printing the configuration page, see p.44 "Test Printing". 58