Ricoh Aficio SP 5210DN Operating Instructions - Page 55
The removed screws are required to fasten the controller board.
View all Ricoh Aficio SP 5210DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Installing the Memory Expansion Units The removed screws are required to fasten the controller board. 4. Gripping the handles, carefully pull out the controller board. 3 CEC075 5. Place the controller board on a flat surface. The hard disk is installed in the slot shown in the illustration below. CEC019 6. Insert the protrusion on the front end of the hard disk board into the notch on the back panel of the controller board. Be sure to set the hard disk board parallel with the controller board. CEC016 53
The removed screws are required to fasten the controller board.
4.
Gripping the handles, carefully pull out the controller board.
CEC075
5.
Place the controller board on a flat surface.
The hard disk is installed in the slot shown in the illustration below.
CEC019
6.
Insert the protrusion on the front end of the hard disk board into the notch on the back panel
of the controller board.
Be sure to set the hard disk board parallel with the controller board.
CEC016
Installing the Memory Expansion Units
53
3