Ricoh Aficio SP 9100DN Hardware Guide - Page 51
Setting SSID, Configuring the Network Interface Board Using Web Browser Software Guide.
View all Ricoh Aficio SP 9100DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
IEEE 802.11b (Wireless LAN) Configuration The factory default is [Auto]. If you need to change the transmitting speed depending on environment you are using, select the appropriate transmitting speed. 10. Print a configuration page to confirm the settings made. • For details about printing the configuration page, see p.33 "Test Printing". Setting SSID If [Infrastructure] or [802.11 Ad hoc] is selected for [Comm. Mode], set SSID to use for transmission. Consult your network administrator for the SSID to use. 1. Press the [ ] or [ ] key to select [SSID], and then press the [ Enter] key. 4 If an SSID has been set, you can check the SSID setting. 2. Press the [ ] or [ ] key to select [Enter ID], and then press the [ Enter] key. 3. Press the [ ] or [ ] key to enter characters, and then press the [ Enter] key. The number of character you have entered is displayed on the top right of the screen. The characters that can be used are ASCII 0x20-0x7e (32 bytes), 16 digits. 4. Print a configuration page to confirm the settings made. • SSID can also be set using a Web browser. For details, see the Web Image Monitor Help, and "Configuring the Network Interface Board Using Web Browser" Software Guide. • WEP key can also be set using a Web browser. For details, see Web Image Monitor Help. • For details about printing the configuration page, see p.33 "Test Printing". 49