Ricoh C232DN Operating Instructions - Page 223
Host Interface Menu Parameters, USB Timeout, Network Timeout, Network Setup
UPC - 026649065064
View all Ricoh C232DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 223 highlights
Host Interface Menu Host Interface Menu Parameters This section explains parameters that can be set on the Host Interface menu. ❖ USB Timeout You can specify how many seconds the printer should wait before ending a print job that is receiving via USB. If printing is frequently interrupted by data from other ports, increase the timeout period. Default: 60 seconds • 15 seconds • 60 seconds • 300 seconds ❖ Network Timeout You can specify how many seconds the printer should wait before ending a print job that is receiving via Ethernet. If printing operation is frequently interrupted by data from other ports, you can increase the timeout period. Default: 60 seconds • 15 seconds • 60 seconds • 300 seconds ❖ Network Setup You can make network-related settings. • DHCP Select whether to set the IPv4 address automatically or manually. Default: On • On • Off Important ❒ After changing the setting, turn off the power of the printer briefly, and then turn it on again. • MAC Address Check the MAC address. • IP Address Specify the IPv4 address. When [DHCP] is set to [On], the IP address cannot be changed. To change it, set [DHCP] to [Off]. Contact your network administrator for information about the network configuration. Default: 192.0.0.192 • Subnet Mask Specify the subnet mask. When [DHCP] is set to [On], the subnet mask cannot be changed. To change it, set [DHCP] to [Off]. Contact your network administrator for information about the network configuration. Default: 255.255.255.0 5 59