Ricoh FX16 Operating Instructions - Page 157
Setting the Dial Mode
View all Ricoh FX16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
Setting the Dial Mode You can select the type of the telephone dial system where your machine is connected. NOTE: The Dial Mode setting may be unavailable depending on your country. 1 Press Menu until "Machine Setup" appears on the top line of the display. 2 Press the scroll button ( or ) until you see "Dial Mode" on the bottom line and press Enter. 3 Press the scroll button ( or ) to select the desired dial mode. Select "Tone" if your machine is connected to a tone dial line. Select "Pulse" if the machine is connected to a pulse dial line. 4 Press Enter to save the selection. 5 To return to Standby Mode, press Clear/Stop. 1.10 GETTING STARTED
G
ETTING
S
TARTED
1
.
10
Setting the Dial Mode
You can select the type of the telephone dial system where your
machine is connected.
N
OTE
:
The Dial Mode setting may be unavailable depending on
your country.
1
Press
Menu
until “Machine Setup” appears on the top line
of the display.
2
Press the scroll button (
or
) until you see “Dial Mode”
on the bottom line and press
Enter
.
3
Press the scroll button (
or
) to select the desired dial
mode.
Select “Tone” if your machine is connected to a tone dial
line.
Select “Pulse” if the machine is connected to a pulse dial
line.
4
Press
Enter
to save the selection.
5
To return to Standby Mode, press
Clear/Stop
.