Ricoh FX16 Operating Instructions - Page 60
Dust on the ADF glass may cause black lines on the, printout. Keep it always clean
View all Ricoh FX16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
2 Make sure that the bottom of the document stack matches the paper size marked on the document tray. 3 Enter the number of copy when you make more than two copies, and then press Enter. 4 Customise the copy settings including copy size, contrast, image by using the control panel buttons. See "Setting Copy Options" on page 4.6. 4 To clear the settings, use the Clear/Stop button. 5 If necessary, you can use special copy features, such as Collation and 2 or 4 up-copying. 6 Press Start to begin copying. The display shows the copy processing. NOTE: Dust on the ADF glass may cause black lines on the printout. Keep it always clean. COPYING 4.5
C
OPYING
4
.
5
4
2
Make sure that the bottom of the document stack matches
the paper size marked on the document tray.
3
Enter the number of copy when you make more than two
copies, and then press
Enter
.
4
Customise the copy settings including copy size,
contrast,
image by using the control panel buttons. See “Setting
Copy Options” on page 4.6.
To clear the settings, use the
Clear/Stop
button.
5
If necessary, you can use special copy features, such as
Collation and 2 or 4 up-copying.
6
Press
Start
to begin copying. The display shows the copy
processing.
N
OTE
:
Dust on the ADF glass may cause black lines on the
printout. Keep it always clean.