Ricoh FX16 Operating Instructions - Page 66
-up or 4-up Copying, NOTE NOTE NOTE NOTE
View all Ricoh FX16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
6 Press Start to begin copying. Your machine begins scanning the front side. 7 When "Set Backside" displays on the bottom line, open the document cover and flip the document over. Close the cover. NOTE: If you press the Clear/Stop button or if no buttons are pressed for about 30 seconds, the machine cancels the copy job and returns to Standby Mode. 8 Press Start again. NOTE: You cannot adjust the copy size using the Reduce/ Enlarge button for making a 2-side Copying. 2-up or 4-up Copying 4 The 2 or 4-up copying feature is available only when you load documents in the ADF. 2 1 Load the documents to be copied in the ADF. 1 ¤2-up copying 1 2 3 4 ¤4-up copying 2 Press Special. 3 Press Special or the scroll button ( or ) until "2-Up" or "4-Up" displays on the bottom line. 4 Press Enter to save the selection. 5 If necessary, customise the copy settings including number of copies, contrast, image by using the control panel buttons. See "Setting Copy Options" on page 4.6. NOTE: You cannot adjust the copy size using the Reduce/ Enlarge button for making a 2 or 4-up copy. 6 Press Start to begin copying. NOTE: 2-up copy reduces your original document by 50 %. 4-up copy reduces the document by the following rates depending on the paper loaded: 76 % for Letter, 81 % for A4 and 95 % for Legal. COPYING 4.11