Ricoh P 801 User Guide - Page 112
Status Messages
![]() |
View all Ricoh P 801 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
5. Troubleshooting Status Messages Message "The cooling fan is active." "Energy Saver Mode" "Hex Dump Mode" "Job Suspended" "Offline" "Please wait..." "Printing..." "Printing Suspended" "Ready" "Resetting Job" "Setting change..." "Updating Certificate..." Status The machine is cooling its interior. Wait a while, and the machine will resume the print job after the cooling is complete. If you use two-sided printing continuously, the machine's interior heats up, and the machine may temporarily suspend the print job for cooling. If this message appears frequently, dust may have accumulated in the ventilation holes of the machine. Check the vents, and clean the dust off. See "Cleaning the Vents", User Guide (Full Version). The machine is in Energy Saver mode. Press any key to recover to the normal mode. In Hex Dump mode, the machine receives data in a hexadecimal format. Turn off the machine after printing, and then turn it on again. All jobs are suspended. Turn off the machine, and turn it on again to resume the jobs. The machine is offline and cannot print. This message may appear for a few seconds. It means the machine is initializing, replenishing toner, or performing maintenance operations. Wait a while. The machine is printing. Wait a while. Printing is suspended. To resume printing, press the [Suspend/Resume] key. This is the default ready message. The machine is ready for use. No action is required. The machine is resetting the print job. Wait a while. The machine is applying the changes made to its settings. Wait a while. The machine is updating the @Remote certificate. Turn the power off, and then turn it on again. 110
![](/manual_guide/products/ricoh-p-800-user-guide-334ba71/112.png)