Ridgid KJ-3100 Owners Manual - Page 17

KJ-2200/KJ-3100 Water Jetting Machines Engine Maintain the engine as directed in the engine operator's manual supplied with the unit. Pump Lubrication Check the pump oil level prior to use. Place the jetter on a level surface. Wipe any dirt and debris from the area of the dipstick and remove the dipstick - check the oil level. If needed, add SAE 30W non-detergent oil. Do not overfill. Reinstall dipstick. Change oil in pump after first 50 hours of operation and every 500 hours of operation after that. With the pump warm from operation, remove plug on bottom of pump and drain oil into suitable container. Replace plug. Fill with approximately 32 oz of SAE 30W non-detergent oil using the checking procedure. Gearbox Lubrication Check the gearbox oil level prior to use. Place the jetter on a level surface. Wipe any dirt and debris from the area of the dipstick and remove the dipstick - check the oil level. If needed, add SAE 90W gear lubricant. Do not overfill. Reinstall dipstick. Change oil in gearbox every 500 hours of operation. With the gearbox warm from operation, remove plug on bottom of gearbox and drain oil into suitable container. Replace plug. Fill with approximately 8 oz of SAE 90W gear lubricant oil using the checking procedure. Preparing Pump for Cold Weather Storage NOTICE If the jetter will be stored under conditions where the temperature is near or below 32°F (0°C), the jetter must be properly prepared. If water freezes in the pump, it can damage it. There are two methods for preparing the jetter for cold weather storage. The first is to open all valves in the system and use compressed air to force any water out of the system. This can also be used to remove water from the hoses. The second method uses RV antifreeze (non-ethylene glycol antifreeze). Do not use ethylene glycol antifreeze in the jetter pump. Ethylene glycol cannot be used in drainage systems. 1. Attach a 3 foot section of hose to the inlet supply valve and open valve. 2. Place the end of the hose into the container of RV antifreeze. 3. Remove the nozzle from the end of the hose. 4. Start the jetter and run until antifreeze comes out of the end of the hose. Accessories WARNING To reduce the risk of serious injury, only use accessories specifically designed and recommended for use with the RIDGID Water Jetter Machines, such as those listed below. Other accessories suitable for use with other tools may be hazardous when used with RIDGID Water Jetter Machines. KJ-2200 Jetter Nozzles and Hoses Catalog No. 64772 64777 64782 82842 64787 64792 82852 47592 47597 47602 49272 49277 64732 50002 50007 47607 47612 47617 51587 49487 51597 Model No. H-61 H-62 H-64 H-65 H-71 H-72 H-75 H-1425 H-1435 H-1450 H-1475 H-1400 H-1415 HL-1 HL-2 H-1250 H-1275 H-1200 H-1211 H-1215 H-1220 Description Propulsion Nozzle Penetrating Nozzle Drop Head Nozzle Spin Nozzle 2200 Propulsion Nozzle Penetrating Nozzle Spin Nozzle 2200 1/4" x 25' 1/4" x 35' 1/4" x 50' 1/4" x 75' 1/4" x 100' 1/4" x 150' Flexible Leader, 1/4″ Flexible Leader, 1/2″ 1/2" x 50' 1/2" x 75' 1/2" x 100' 1/2" x 110' 1/2" x 150' 1/2" x 200' 1/8" NPT Fits 1/4" Hose 1/4" NPT Fits 1/2" Hose 1/4" Trap Hose Orange 1/2" Jet Hose Black Hose Hose I.D. O.D. 3/16" 3/16" 3/16" 3/16" 3/16" 3/16" 1/8" 1/8" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 3/16" 3/16" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" KJ-2200 Jetter Accessories Catalog No. 62882 64737 62877 64077 64767 51572 48157 66732 48367 47542 67187 Model No. H-5 H-30 H-30 WH HP-22 HW-22 H-1235 FV-1 HF-4 H-25 H-21 H-32 Description Mini Hose Reel (No Hose included) H-30 Cart with Hose Reel H-30 Cart with Hose Reel and 110' x 1/2" Jet Hose Pressure Wash Package, KJ-2200 Wash Wand, KJ-2200 Wash Wand Hose 1/2" x 35' Foot Valve Quick Connect Hose Winterizing Kit Nozzle Cleaning Tool Jet Vac 15