Ridgid KJ-3100 Owners Manual - Page 8
Pre-Operation Inspection
View all Ridgid KJ-3100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
KJ-2200/KJ-3100 Water Jetting Machines T-Knobs Figure 5 - KJ-3100 Handle Assembly Insert Hair Pin Pre-Operation Inspection WARNING Figure 6A - KJ-2200 Warning Labels Before each use, inspect your water jetter and correct any problems to reduce the risk of serious injury from high pressure water and other causes and prevent jetter damage. Always wear safety glasses, gloves and other appropriate protective equipment when inspecting your jetter to protect against chemicals and bacteria on the equipment. 1. Make sure that the engine switch/key is in the OFF position. 2. Clean any oil, grease or dirt from the equipment, including the handles and controls. This aids inspection and helps prevent the machine or control from slipping from your grip. 3. Inspect the water jetter and accessories for the following: • Proper assembly and completeness • Broken, worn, missing, mis-aligned, binding or loose parts • Presence and readability of the warning labels. (See Figure 6) • Any other condition which may prevent the safe and normal operation If any problems are found, do not use the water jetter until the problems are corrected. 6 Figure 6B - KJ-2200 Warning Labels Figure 6C - KJ-3100 Warning Labels