Samsung CLP 500 User Manual (ENGLISH) - Page 184
On Line/Continue, printer. See Installing Printer
UPC - 635753702002
View all Samsung CLP 500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 184 highlights
Message Load [Size] In Tray1 OR Load [Size] In Tray2 Load Manual Press Cont Key Main Motor Error Memory Overflow Paper Empty [Size] In Tray1 Paper Empty [Size] In Tray2 Paper Empty [Size] In Mp Paper Empty [Size] In Manual Page Too Complex Ready [Color] Low Toner Ready IP Conflict Status Do this... The paper size specified in the printer properties does not match the paper you are loading. Load the correct paper in the tray. It is waiting user's action to print from the manual feeder with paper. Load a sheet of print material and press the On Line/Continue button. You need to press the button for each page to be printed. A problem has occurred in the main motor of the printer. Unplug the power cord and plug it in again. If the problem persists, please call for service. The printer does not have enough memory to print the current job. An error has occurred in the firmware program of the printer. The job automatically clears and the printer returns to Standby Mode. • Expand the memory in your printer. See "Installing Printer Memory" on page C.2. The paper tray has run out of papers. Load paper in the paper tray. See page 3.4. Too much complicated data was sent to the printer. Simplify the page layout and remove unnecessary graphics from your document. To expand the memory in your printer, see "Installing Printer Memory" on page C.2. The corresponding toner cartridge in your printer is nearly empty. Redistribute the toner in corresponding toner cartridge, referring to page 6.5. An IP address conflicts with only other devices on the network. Contact your network administrator and choose an address within your subnet which will not conflict with any other devices. 7.28 SOLVING PROBLEMS