Samsung CLP 500 User Manual (ENGLISH) - Page 19
Step 5. Connecting a Printer Cable, Using a Parallel Cable
UPC - 635753702002
View all Samsung CLP 500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
English Step 5. Connecting a Printer Cable You need to connect your printer to the computer with either a parallel interface cable or a Universal Serial Bus (USB) cable. Using a Parallel Cable NOTES: • The parallel port may not be available depending on your country. • To connect the printer to the parallel port of the computer requires a certified parallel cable. You need to buy a IEEE1284 compliant cable that is within 3m in length. 1 Make sure that both the printer and the computer are turned off. 2 Plug the parallel printer cable into the connector on the back of the printer. Push the metal clips down to fit inside the notches on the cable plug. To the parallel port on your computer 3 Connect the other end of the cable to the parallel interface port on your computer, and tighten the screws. See the User's Guide of your computer, if you need help. SETUP GUIDE 19