Samsung DVD-V4600 User Manual (user Manual) (ver.1.0) (English) - Page 29
Tracking, Auto Play, If you want your videotapes to play automatically when - problems
View all Samsung DVD-V4600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Tracking Auto Play The Tracking adjustment removes the white lines that sometimes appear during playback because of slight differences in recording decks. The TRK button will automatically align the recorded tracks with the playback heads to solve this problem. You may also set tracking manually. 1 Adjust Tracking Manually During playback, press the CH/TRK / buttons to remove white lines from the picture. If you want your videotapes to play automatically when you insert them, turn on Auto Play. NOTE: Only tapes that are missing the Record Safety Tab will play automatically when inserted. 1 Open the "MENU" With the VCR in Stop or Play mode, press the MENU button. 2 Select "VCR" Using the UP/DOWN buttons, move the selection bar to "VCR" then press ENTER to select. 3 Select "Tape Length" Press the RIGHT button to select the Tape Length. This information is usually printed on the tape box. The menu cycles through: T-120, T-160 or T-180. Once the type of cassette is set, the VCR can display the amount of time remaining on the tape when you press the INFO. button. T-120 T-160 n T-180 4 Select "Auto Play" Move the selection bar to "Auto Play," then press right button to select from the following options: • On - The VCR will automatically begin playing a video tape when it is inserted, as long as the safety tab of the cassette has been removed. • Off - Auto play is disabled. On n Off ENG-28