Samsung R510 User Manual (user Manual) (ver.f6.1) (English) - Page 9
Turn Your Phone On, Remove the Battery, the display.
View all Samsung R510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
3. Place the battery cover over the battery and slide the cover upward into place (3). Activating Your Phone 3 Turn Your Phone On 1. Press and hold the END key for two or more seconds. Note: As with any other radio-transmitting device, do not touch the antenna while using your phone as this can affect call quality and can cause the phone to operate at a higher power level than is necessary. 2. The phone begins searching for a network signal. 3. Once the phone finds a signal, the time, date and day appear at the top of the display. 4. You're now ready to place and receive calls. Note: If you are outside of your carrier's coverage or roaming area ( ), the No Service icon ( ) appears at the top of the phone's display. If you cannot place or receive calls, try later when service is available, or at another location. Turn Your Phone Off ᮣ Press and hold the END key for two or more seconds. Your phone powers off. Note: If your phone is on and you press END for less than one second, the phone will not power off. This prevents your phone from being turned off accidentally. Remove the Battery Important! You must unplug the Travel Adapter (if it is connected) before removing the battery from the phone during charging to avoid damage. 1. Press and hold the END key to turn off the phone (if on). 2. Slide the cover toward the bottom end of the phone. Getting Started 9