Samsung SCDC164 User Manual (ENGLISH) - Page 21

Using the Lithium Ion Battery Pack

Page 21 highlights

ENGLISH 臺 灣 Preparation Using the Lithium Ion Battery Pack  Use SB-LSM80 or SB-LSM160 (not supplied) Battery Pack only.  The Battery Pack may be charged a little at the time of purchase. Charging the Lithium Ion Battery Pack 1. Turn the [Power] switch to [Off]. 2. Attach the Battery Pack to the DVD Camcorder. 3. Connect the AC Power adapter (AA-E9 TYPE) to a wall socket. 4. Open the LCD Screen and Jack Cover. 5. Connect the DC cable to the DC IN Power Switch jack on the DVD Camcorder. The charging indicator will start to blink, showing that the Battery is charging. 6. When the Battery is fully charged, disconnect the Battery Pack and the AC Power Adapter from the DVD Camcorder. Even with the power switched off, the Battery Pack will still discharge. 5 準備工作 SB-LSM80 或 SB-LSM160 1. 將 [Power Off]。 2 DVD 3 AA-E9 4. 開啟 LCD 5 6 DVD Blinking time Once per second Twice per second Three times per second Blinking stops and stays on On for a second and off for a second Charging rate Less than 50% 50% ~ 75% 75% ~ 90% 90% ~ 100% Error - Reset the Battery Pack and the DC Cable 50% 50% ~ 75% 75% ~ 90% 90% ~ 100 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128

<Charging indicator>
5
Power Switch
ENGLISH
21
Preparation
Using the Lithium Ion Battery Pack
Use SB-LSM80 or SB-LSM160 (not supplied) Battery Pack only.
The Battery Pack may be charged a little at the time of purchase.
Charging the Lithium Ion Battery Pack
1.
Turn the
[Power]
switch to
[Off]
.
2.
Attach the Battery Pack to the DVD
Camcorder.
3.
Connect the AC Power adapter
(AA-E9 TYPE) to a wall socket.
4.
Open the LCD Screen and Jack
Cover.
5.
Connect the DC cable to the DC IN
jack on the DVD Camcorder.
The charging indicator will start to
blink, showing that the Battery is
charging.
6.
When the Battery is fully charged,
disconnect the Battery Pack and the
AC Power Adapter from the DVD
Camcorder. Even with the power switched off, the
Battery Pack will still discharge.
Blinking time
Charging rate
Once per second
Less than 50%
Twice per second
50% ~ 75%
Three times per second
75% ~ 90%
Blinking stops and stays on
90% ~ 100%
On for a second and off for a
second
Error - Reset the Battery Pack and the DC
Cable
準備工作
使用鋰離子電池組
僅使用 SB-LSM80 或 SB-LSM160(未提供)電池組。
電池組在購買時可能已經有少量電量。
為鋰離子電池組充電
1.
[Power]
開關轉至
[Off]
2.
將電池組裝入 DVD 攝錄放影機。
3.
將交流電源適配器(AA-E9 型)連接
到牆上插座。
4.
開啟 LCD 螢幕和插孔蓋。
5.
將直流電纜線連接到攝錄放影機上的
直流電插孔。
充電指示器將會開始閃爍,顯示電池
正在充電。
6.
電池完全充電後,從 DVD 攝錄放影
機拔下電池組和交流電變壓器。即使
將電源開關轉至關閉,電池組仍然會
放電。
閃爍時間
充電率
每秒一次
少於 50%
每秒兩次
50% ~ 75%
每秒三次
75% ~ 90%
停止閃爍並保持亮起
90% ~ 100%
亮起一秒然後熄滅一秒
錯誤 - 重設電池組和直流電纜線