Samsung SMO-152QN User Guide - Page 44
NETWORK SETTING function and setting method
UPC - 036725120181
View all Samsung SMO-152QN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
3-7) NETWORK SETTING function and setting method • Static • DHCP • ADSL (PPPoE) • Function: Allows users to select the STATIC (fixed) IP, DHCP, PPPoE of Setting. • Setting method: Move to #7, NETWORK SETUP MENU by using L/M KEY at SETUP MENU, then press the ENTER SWITCH to display the OSD as shown in the figure below. (The figure shows the initial setting status) 06/01/03 NETWORK SETTING 13:14:00 1. NETWORK ACCESS STATIC.../DHCP.../PPPoE... 2. HTTP PORT 00080 NETWORK STATUS IP ADDR GATEWAY SUBNETMASK DNS 1 DNS 2 MAC ADDR 192.168.1.200 192.168.1.65 255.255.255.0 168.126.63.1 168.126.63.2 00:30:6f:ff:00:00 MOVE TO EACH item by using L/M KEY, and using ➛/❿ KEY change the set value. Static IP User - Constituted by Static IP on the TCP/IP network 1) Move to 'STATIC...' by using L/M KEY at NETWORK ACCESS, then press ENTER SWITCH to set STATIC... (STATIC : Select in case the network configuration of monitor is fixed IP (Public or Private IP) 06/01/03 STATIC ACCESS IP ADDR GATEWAY SUBNETMASK DNS 1 DNS 2 13:14:00 192.168.1.200 192.168.1.65 255.255.255.0 168.126.63.1 168.126.63.2 2) Move to IP ADDR / GATEWAY / SUBNETMASK by using L/M KEY. 3) Press ENTER SWITCH and type in IP ADDR / GATEWAY / SUBNETMASK respectively. 4) DNS 1 and DNS 2 will be automatically set to DNS as shown above. Use ➛/❿ KEY to change it. Eng-44