Samsung SRP-350PG Service Manual - Page 64
Control Commands
View all Samsung SRP-350PG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Command 8. Control Commands HT [Name] [Format] [Description] Horizontal tab. ASCII HT Hex 09 Decimal 9 Moves the print position to the next horizontal tab position. LF [Name] [Format] [Description] Print and line feed. ASCII LF Hex 0A Decimal 10 Prints the data in the print buffer and feeds one line based on the current line spacing. FF [Name] [Format] [Description] Print and return to standard mode in page mode. ASCII FF Hex 0C Decimal 12 Prints the data in the print buffer collectively and returns to standard mode. CR [Name] [Format] [Description] Print and carriage return. ASCII CR Hex 0D Decimal 13 When automatic line feed is enabled, this command functions the same as LF : when automatic line feed is disabled, this command is ignored. CAN [Name] [Format] [Description] Cancel print data in page mode. ASCII CAN Hex 18 Decimal 24 In page mode, deletes all the print data in the current printable area. DLE EOT n [Name] Real-time status transmission. [Format] ASCII DLE EOT n Hex 10 04 n Decimal 16 4 n [Range] 1 ≤n ≤4 [Description] Transmits the selected printer status specified by n in real-time, according to the following parameters : n = 1 : Transmit printer status. n = 2 : Transmit off-line status. n = 3 : Transmit error status. n = 4 : Transmit paper roll sensor status. Samsung Electro-Mechanics 8-1