Samsung SRP-350PG Service Manual - Page 80

Command GS h n [Name] [Format] [Range] [Description] Set bar code height. ASCII GS f n Hex 1D 68 n Decimal 29 104 n 1 ≤ n ≤255 Set the height of the bar code. n specifies the number of dots in the vertical direction. ① GS k m d1...dk NUL , ② GS k m n d1...dn [Name] [Format] Print bar code. ① ASCII GS k m d1...dk NUL Hex 1D 6B m d1...dk 00 Decimal 29 107 m d1...dk 0 ② ASCII GS k m n d1...dn Hex 1D 6B m n d1...dn [Range] Decimal 29 107 m n d1...dn ① 0 ≤m ≤6 (k and d depends on the bar code system used.) ② 65 ≤m ≤73 (n and d depends on the bar code system used.) [Description] Selects a bar code system and prints the bar-code. m selects a bar ode system as follows : m Bar Code System Number of Characters Remarks 0 UPC-A 11 ≤k ≤12 48 ≤d ≤57 1 UPC-E 11 ≤k ≤12 48 ≤d ≤57 2 JAN13(EAN13) 12 ≤k ≤13 48 ≤d ≤57 3 JAN8(EAN8) ① 4 CODE 39 7 ≤k ≤8 1 ≤k 48 ≤d ≤57 48 ≤d ≤57, 65 ≤d ≤90, 32, 36, 37, 43, 45, 46, 47 5 ITF 1 ≤k (even number) 48 ≤d ≤57 6 CODABAR 1 ≤k 48 ≤d ≤57, 65 ≤d ≤68, 36, 43, 45, 46, 47 ,58 65 UPC-A 11 ≤n ≤12 48 ≤d ≤57 66 UPC-E 11 ≤n ≤12 48 ≤d ≤57 67 JAN13(EAN13) 12 ≤n ≤13 48 ≤d ≤57 68 JAN8(EAN8) 7 ≤n ≤8 48 ≤d ≤57 48 ≤d ≤57, 69 CODE 39 ② 1 ≤n ≤255 65 ≤d ≤90, 32, 36, 37, 43, 45, 46, 47 d1 = dk = 42(1) 70 ITF 1 ≤n ≤255 (even number) 48 ≤d ≤57 71 CODABAR 1 ≤n ≤255 48 ≤d ≤57, 65 ≤d ≤68, 36, 43, 45, 46, 47 ,58 72 CODE 93 1 ≤ n ≤255 0 ≤d ≤127 73 CODE 128 1 ≤ n ≤255 0 ≤d ≤127 GS r n [Name] [Format] [Range] [Description] Transmit status. ASCII GS V n Hex 1D 72 n Decimal 29 114 n n = 1, 2, 49, 50 Transmits the status specified by n as follows. Samsung Electro-Mechanics 8-17