Samsung SRP-350PG Service Manual - Page 72
ESC c 4 n, ESC c 5 n, ESC d n, ESC p m t1 t2
View all Samsung SRP-350PG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Command ESC c 4 n [Name] [Format] [Range] [Description] Select paper sensor(s) to stop printing. ASCII ESC c 4 n Hex 1B 63 34 n Decimal 27 99 52 n 0 ≤nL ≤255 Selects the paper sensor(s) used to stop printing when a paper-end is detected, using n as follows : Bit Off/On Hex 0 Off 00 On 01 1 Off 00 On 02 2-7 - - Decimal 0 1 0 2 - Function Paper roll end sensor disable. Paper roll end sensor enable. Paper roll end sensor disable. Paper roll end sensor enable. Undefined. ESC c 5 n [Name] [Format] [Range] [Description] Enable / Disable panel button. ASCII ESC c 3 n Hex 1B 63 35 n Decimal 27 99 53 n 0 ≤n ≤255 Enables or disables the panel button. * When the LSB of n is 0, the panel buttons are enabled. * When the LSB of n is 1, the panel buttons are disabled. ESC d n [Name] [Format] [Range] [Description] Print and feed n lines. ASCII ESC d n Hex 1B 64 n Decimal 27 100 n 0 ≤n ≤255 Prints the data in the print buffer and feeds n lines. ESC p m t1 t2 [Name] Generate pulse. [Format] ASCII ESC p m t1 t2 Hex 1B 70 m t1 t2 Decimal 27 112 m t1 t2 [Range] m = 0, 1, 48, 49 0 ≤t1 ≤255, 0 ≤t2 ≤255 [Description] Outputs the pulse specified by t1 and t2 to connector pin m as follows. m 0, 48 1, 49 Connector pin Drawer kick-out connector pin 2 Drawer kick-out connector pin 5 Samsung Electro-Mechanics 8-9