Samsung SRP-350PG Service Manual - Page 66
DLE ENQ n, ESC FF, ESC SP n, ESC ! n, ESC $ nL nH
View all Samsung SRP-350PG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Command DLE ENQ n [Name] Real-time request to printer. [Format] ASCII DLE ENQ n Hex 10 05 n Decimal 16 5 n [Range] 1 ≤n ≤2 [Description] Recovers from an error and restart printing from the line where the error occurred. ESC FF [Name] [Format] [Description] Print data in page mode. ASCII ESC FF Hex 1B 0C Decimal 27 12 In page mode, prints all buffered data in the printing area collectively. ESC SP n [Name] [Format] [Range] [Description] Set right-side character spacing. ASCII ESC SP n Hex 1B 20 n Decimal 27 32 n 0 ≤n ≤255 Sets the character spacing for the right side of the character to [n ×horizontal or vertical motion units]. ESC ! n [Name] [Format] [Range] [Description] Select print modes. ASCII ESC ! n Hex 1B 21 n Decimal 27 33 n 0 ≤n ≤255 Selects print mode(s) using n as follows. Bit Off/On Hex Decimal Function 0 Off 00 0 Character font(12 ×24) selected. On 01 1 Character font(9 ×17) selected. 1,2 - - - Undefined. 3 Off 00 0 Emphasized mode not selected. On 08 8 Emphasized mode selected. 4 Off 00 0 Double-height mode not selected. On 10 16 Double-height mode selected. 5 Off 00 0 Double-width mode not selected. On 20 32 Double-width mode selected. 6 - - - Undefined. 7 Off 00 0 Underline mode not selected. On 80 128 Underline mode selected. ESC $ nL nH [Name] Set absolute print position. [Format] ASCII ESC $ nL n Hex 1B 24 nL n Decimal 27 36 nL n [Range] 0 ≤n ≤255 0 ≤n ≤255 [Description] Set the distance from the beginning of the line to the position at which subsequent characters are to be printed. * The distance from the beginning of the line to the print position is [(nL + nH ×256) ×(vertical or horizontal notion unit)] inches. Samsung Electro-Mechanics 8-3