Sanyo PDG-DXL2000 Owners Manual - Page 33
Auto PC adjustment, Menu Operation
UPC - 086483079436
View all Sanyo PDG-DXL2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Computer Input Auto PC adjustment Auto PC adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal , Vertical and Clamp position to conform to your computer. Menu Operation Auto PC adj. 1 Press the MENU button to display the On-Screen Menu. Use the Point ed buttons to select PC adjust and then press the Point 8 or the SELECT button. 2 Use the Point ed buttons to select Auto PC adj. and then press the SELECT button. PC adjust Menu To store adjustment parameters The adjusted parameters from the Auto PC adjustment can be stored in the projector. Once the parameters are stored, the setting can be done just by selecting a Mode (1-10) in the PC System Menu (See page 32). See also "Store" on page 35. 4Note: • Fine sync, Total dots, Horizontal and Vertical position of some computers can not be fully adjusted with the Auto PC adjustment function. When the image is not provided properly with this operation, manual adjustments are required (pp.34-35). • The Auto PC adjustment can not be operated when 480i, 575i, 480p, 575p, 720p or 1080i is selected in the PC System Menu (p.32) , or when the signal is coming from the HDMI terminal. Use Point ed buttons to select Auto PC adj. and press the SELECT button. Please wait... appears while the Auto PC adjustment is in process. 33