Sanyo PDG-DXL2000 Owners Manual - Page 62
PIN code lock, Lamp counter, Filter counter, Factory default, Use the Point
UPC - 086483079436
View all Sanyo PDG-DXL2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Setting Filter counter This function is used to set a frequency for the filter replacement. Use the Point ed buttons to select Filter counter and then press the Point 8 or the SELECT button to access the submenu items. Filter counter......... Show the total accumulated time of the filter use timer setting. Timer To set a timer, when the projector reaches the time, the Filter warning icon (Fig.1) appears on the screen and the total accumulated time turns red, indicating that the filter replacement is necessary. Filter counter reset... After replacing the filter, be sure to reset the timer. The Filter warning icon will not turn off until the filter counter is reset. For details about resetting the timer, refer to "Resetting the Filter Counter" on page 65. Filter counter Press the SELECT button to select Timer, and then use the Point ed buttons to set the timer. Select from (Off/ 2000H/ 3000H/ 4000H) depending on the use environment. Fig.1 Filter warning icon Filter warning icon appears on the screen at a set time (Off/2000H/ 3000H/4000H). 4Note: • The Filter warning icon (Fig.1) will not appear when the Display function is set to Off (p.53), or Freeze (p.28), or No show (p.29). • This icon also appears at turning on. Factory default Factory default This function returns all setting values except for the User logo, PIN code lock, Logo PIN code lock, Lamp counter and Filter counter to the factory default settings. 62