Sanyo PDG-DXL2000 Owners Manual - Page 38

Computer Input Screen Size Adjustment This projector has the picture screen resize function, which enables you to customize the image size. 1 Press the MENU button to display the On-Screen Menu. Use the Point ed buttons to select Screen and then press the Point 8 or the SELECT button. 2 Use the Point ed buttons select the desired item and then press the SELECT button . Screen Menu Normal Provide the image to fit the screen size while maintaining the aspect ratio of input signal. Full Provide the full screen image. Wide (16:9) Provide the image at the 16:9 wide screen ratio. Zoom Scale the image proportionally to fit the entire screen. Either side of image may go over the screen. True Provide the image in its original size. When the original image size is larger than the screen size (1024 x 768), the projector automatically switches to the panning mode. Use the Point ed7 8 buttons to pan the image. When adjusted, the arrows turn red. When reached to the correction limit, the arrows disappear. Custom Provide the last stored aspect screen image. 4Note: • T his projector can not display any resolution higher than 1920 x 1200. If your computer's resolution is higher than that, lower the resolution before connecting to the projector. • The image data other than 1024 x 768 is modified to fit the screen size in initial mode. • True and Digital zoom +/- can not be selected when 480i, 575i, 480p, or 575p is selected in the PC System Menu (p.32). • Zoom and Image Position Adjustment (p.25) will be canceled when Custom is selected in the Screen menu. 38