Sanyo PDG-DXL2000 Owners Manual - Page 48
D Display, For Viewing 3D Contents
![]() |
UPC - 086483079436
View all Sanyo PDG-DXL2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
3D Display For Viewing 3D Contents To view 3D images, you need to prepare at least the 3D active shutter glasses, 3D content and 3D reproducing equipment. For example, as for computer, when transmitting 3D signals from a computer to the projector, you also need to install the graphic card which has the capability to sequentially output the 3D frames at 120Hz and software in the computer. The 3D signal type which the projector can accept is frame sequential only. Other 3D signal types such as frame packing and side-by-side are not supported. As for 3D glasses, DLP Link format and IR emitter format are compatible with this projector. Compatibility with any other 3D glasses than the 2 types 3D glasses is not guaranteed. Remote Control In a situation of using NVIDIA® 3D glasses, NVIDIA IR emitter, and a computer which NVIDIA graphics card is installed, when you want to view NVIDIA-compatible 3D contents, please set to NVIDIA 3D VISION mode. * COMPUTER IN 2/MONITOR OUT terminal is not supported NVIDIA® 3D VISION™. Please input the image signals to COMPUTER IN 1/COMPONENT IN or HDMI terminal. Using 3D Glasses with DLP Link compatible When using DLP Link compatible glasses, follow these steps: 1. Turn on the projector and the 3D glasses. 2. Wear the 3D glasses and press the 3D button on the remote control to activate 3D Display function. When 3D mode is in On, 3D indicator turns blue. 3. If you see a discrete or overlapping image, 3D Sync Invert function enables you to get the correct image. Press the 3D button to switch 3D Sync signal from among "3D Off", "3D (Sync 1)", "3D (Sync 2)" or "3D VISION". 3D setting can also be selected from the menu (p.52). LCD Glasses with DLP Link compatible Stereoscopic Wireless LCD Glasses 3D button 3D Mode 3D Off 3D (Sync 1) 3D (Sync 2) 3D VISION Infrared Emitter 3D SYNC Input Using 3D Glasses with IR wireless emitter When using IR emitter system, follow these steps: Sync Signal Cable (Supplied with the IR Emitter) 1. Turn off the projector. 2. Connect the sync cable for the IR emitter to 3D SYNC OUT terminal of the projector. 3. Turn on the projector, the IR emitter and the stereoscopic wireless LCD glasses. 4. Wear the 3D glasses and press the 3D button on the remote control to activate 3D Display function. 5. If you see a discrete or overlapping image, press the 3D button to switch 3D Sync signal from among "3D Off", "3D (Sync 1)", "3D (Sync 2)" or "3D VISION". You can also invert the sync signal by using the switch on the IR emitter. 3D SYNC OUT Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables. 48
![](/manual_guide/products/sanyo-pdgdxl2000-owners-manual-b532273/48.png)