Sanyo PDG-DXL2000 Owners Manual - Page 39

Computer Input Custom adj. Adjust the screen scale and position manually with this function. Press the Point 8 button at Custom adj. and the Custom adjustment menu is displayed on the screen, you can use the Point ed buttons to choose the item you want to adjust. Scale H/V........... Adjust the Horizontal/Vertical screen scale. H&V When set to On, the aspect ratio is fixed. Scale V appears dimmed and becomes unavailable. Adjust Scale H, then the screen scale is automatically modified based on the aspect ratio. Position H/V...... Adjust the Horizontal/Vertical screen position. Common Save the adjusted scale or position to all the inputs. Press the SELECT button at Common to display a confirmation box. To save the scale or position, press the SELECT button at "Yes". When Custom is selected, the saved scale or position is used. Reset Reset the all adjusted values. Press the SELECT button at Reset to display a confirmation box. To reset, press the SELECT button at "Yes". Digital zoom + Select Digital zoom +. The On-Screen Menu disappears and D. zoom + appears. Press the SELECT button to expand the image size. Use the Point ed7 8 buttons to pan the image. The Panning function can work only when the image is larger than the screen size. A projected image can be also expanded by pressing the D.ZOOM e or the SELECT button on the remote control. Digital zoom - Select Digital zoom -. The On-Screen Menu disappears and D. zoom - appears. Press the SELECT button to compress image size. The projected image can be also compressed by pressing the D.ZOOM d or the SELECT button on the remote control. To exit the Digital zoom +/- mode, press any button except the D.ZOOM ed and the SELECT buttons. To return to the previous screen size, select a screen size from the Screen Size Adjustment Menu or select an input source from the Input Source Selection Menu (See pages 30-31) again, or adjust the screen size with the D.ZOOM ed buttons. Custom adj. Menu 4Note: • When no signal is detected, Normal is set automatically and Custom adj. cannot be selected and the Aspect dialog box disappears. • The adjustable range for Scale H/V and Position H/V is limited depending on the input signal. D.ZOOM +/- Remote Control POINTed7 8 buttons SELECT button D.ZOOM e button D.ZOOM d button 4Note: • The panning function may not operate properly if the stored Mode in the PC adjust Menu is used (p.35). • The minimum compression ratio is limited depending on the input signal, when the Keystone function is working or when Custom is selected for the screen size. • True and Digital zoom +/- can not be selected when 480i, 575i, 480p, or 575p is selected in the PC System Menu (p.32). • Digital zoom +/- can not be selected when True is selected in the Screen menu. (p.38) 39