Sanyo PDG-DXL2000 Owners Manual - Page 70
Contrast, Brightness, Colorboard, PC adjustment, Screen, 5²5p, ²20p, Store, Freeze, Auto setup
![]() |
UPC - 086483079436
View all Sanyo PDG-DXL2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Appendix Image Problem Image is out of focus. Picture is not bright enough. The color is strange. The image is distorted or runs off. Auto PC adjustment function does not work. Some displays are not seen during the operation. The setting does not remain after turning off power. Power management does not work. Capture function does not work. Auto setup does not work properly. Top control does not work. The remote control does not work. Solutions q Adjust focus of the projector. q Provide proper distance between the projector and the projection screen. q Check the projection window to see if it needs cleaning. q Moving the projector from a cool to warm place may result in moisture condensation on the projection lens. In such cases, leave the projector off and wait until condensation evaporates. q Check if the Contrast or Brightness is adjusted properly. q Check if Image mode is selected properly. q Check the lamp control function. q Check the LAMP REPLACE indicator. If it lights, the end of lamp life is approaching. Replace the lamp with a new one promptly. q Check the Input signal, color system, video system or computer system mode. q Make sure the Colorboard is not selected on Screen Menu. q Check PC adjustment Menu or Screen and adjust them. q Check the Input signal. Auto PC function can not work when 480p, 575p, 720p, 480i, 575i or 1080i is selected, or when the digital signal is input into HDMI terminal. q Check the Display function. q Make sure you selected Store after adjusting setting. Some settings can not be stored if not registered with "Store". q Power management function can not work while Freeze or No Show is running. q Check the connection and the input signal to see if there is signal q Make sure Off is not selected at any function of Auto setup q The top control is not available if the top control is locked at Key lock under Security of SETTING section. q Check the batteries. q Make sure no obstruction is between the projector and remote control. q Make sure you are not too far from the projector when using the remote control. Maximum operating range is 16.4'(5 m). q Make sure the code of the remote control is conformed to the projector's code. q Unlock the Key lock function for the remote control function. Pages 25 15 66 37, 44 36 28, 58 67 40, 47 34-35, 38-40 32, 33 53 37, 45 57 54 51 59 58 59 Setting and adjustment Remote control 70
![](/manual_guide/products/sanyo-pdgdxl2000-owners-manual-b532273/70.png)